background image

6

(wheels at the bottom, controls at the top). Any other po-
sition could be dangerous!

INSTRUCTIONS FOR USE

Switching on

Turn the thermostat dial clockwise to maximum.  
Turn on both switches. The lights on the switches remain on 
irrespective of the cycle set by the thermostat.  
When the room reaches the required temperature, turn the 
dial counter clockwise slowly until you hear a click. 
The appliance will come on and go off automatically to main-
tain the required temperature. 

Economiser 

For economy of use, the switches can be used singly:
-   button in position «

MIN

» only = minimum power (light 

on) 

-   button in position «

MED

» only = medium power (light 

on) 

-   buttons in both positions «

MIN

» and «

MED

» = maxi-

mum power (lights on)

Using the thermostat

The thermostat operates on the basis of room temperature 
and not radiator temperature. 
Turn the thermostat dial counter clockwise towards the 
lower numbers to reduce the temperature; turn it clockwise 
towards the higher numbers to raise the temperature. To 
turn the appliance off completely, turn the thermostat to 
minimum   and unplug from the outlet.

Frost protection function

With the thermostat in position   and the switches 
pressed, the appliance maintains the room at a temperature 
of about 41°F (5°C), preventing freezing with minimum en-
ergy consumption.

COMFORTEMP BUTTON

With the “COMFORTEMP” button and both switches pressed, 
the appliance is automatically set to reach and maintain 
what is considered to be the comfort temperature. 
A green light comes on to indicate activation of “COMFOR-
TEMP”. In this mode the temperature is automatically set 
only by  the “COMFORTEMP”. To deactivate this mode and 
return to thermostat operation, press the COMFORTEMP 
button again.

MAINTENANCE

Before carrying out any operation on the radiator, unplug 
from the electric outlet and wait for it to cool. 
The oil-filled electric radiator requires no particular main-
tenance. It is sufficient to remove the dust with a soft, dry 
cloth. Never use abrasive powders or solvents. If necessary 
remove concentrations of dirt using a vacuum cleaner.

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

The appliance doesn't work

Be sure it is plugged in and that the elec-
trical outlet is working.

Check for any obstruction.

The temperature may be set too low.

Plug into the power outlet.

Remove the obstruction and let the appliance 
cool down. If the appliance doesn't work please 
contact the De longhi toll free number.

 Set the temperature to a higher position.

Отзывы: