Picture 9 -
TO REMOVE PUMP
9.1
Take off the spring
and then the tube
Attention
: Some water could come out
from the tube, since the water circuit is
empting out
9.2
Take off pump
9.3
Attention
: After you have taken off cables,
you will have to take off pump thermal protector.
Since it is glued, you will have to use a certain strength.
Remember to glue it again when you will reassemble it
10.1
Take off the 4 indicated screws. After you have taken off cables, take out the board
Picture 10 -
TO REMOVE BOARD
Page 4
