Setting the clock (electronic models only) (Fig. 1)
Plug the appliance in; when switched on for the first time, the dis-
play will show “12:00”.
To set the time, proceed as follows:
-
Press the "PROG" button The word "CLOCK" appears on the
display.
-
Press the “HOUR” button repeatedly until the correct hour appears.
-
Press the “MIN” button repeatedly until the correct minutes
appear.
Keep the buttons pressed to scroll the hours and minutes quickly.
-
Once the time is set press the “PROG” button twice or wait 10
seconds.
-
To return to the current time, press the "PROG" button twice
or wait 10 seconds.
How to prepare the filter coffee
• Lift the cover (Fig. 2).
• Fill the water tank (the carafe gives an indication of the levels)
with fresh clean water up to the mark corresponding to the
number of cups of coffee to be prepared (fig. 3).
• Position the permanent filter into the filter holder into the
machine (fig. 4).
• Place the ground coffee in the filter, using the measuring spoon
supplied, and level evenly (Fig. 5). As a general rule, use a level
measuring spoon of ground coffee for each cup (for example,
10 spoons to make 10 cups).The quantity of ground coffee used
may vary according to personal taste. Use good quality, medium
ground coffee, packaged for filter coffee makers.
• Close the cover and place the carafe with the cover in place on
the hot plate.
Mechanical models only:
• Press the switch to the "I" position: the switch will light up (fig. 6).
• The coffee will filter through after a few seconds. It is complete-
ly normal for the appliance to release a little steam while the
coffee is filtering.
• If the switch is left in the "I" position after filtration, the hot
plate keeps the coffee at the ideal temperature.
fig. 6
Coffee Maker
4
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
ICM2/4 UK 28-04-2003 14:35 Pagina 4
