Filter Coffee Maker
7
• The coffee will start to come out after a few seconds.
It is
completely normal for the appliance to release a little
steam while the coffee is filtering.
• A beep indicates when the coffee is ready.
If you leave the
ON/OFF button pressed after percolation has finished, the
plate will keep the coffee at the ideal temperature.
Attention: removing the jug before all the coffee is made does
not interrupt production of the coffee, but merely blocks flow
into the jug. If you want to pour out a little coffee immediate-
ly, you are recommended to do so as rapidly as possible in
order to avoid the coffee overflowing in the filter holder.
PROGRAMMING START-UP (AUTO)
Check that the time of day is set correctly.
To programme when you want the coffee to be made:
• Press the "SET TIMER" button and hold it down until the start-
up time is reached.
• Then release the "SET TIMER" button.The time flashes briefly.
ACTIVATING THE TIMER FUNCTION
After:
- setting the time you want the appliance to come on and go off
as described in the above paragraph;
- preparing the appliance to make coffee. Press the
"ON/AUTO/OFF" button (fig. 9) rapidly twice.The light on the
button shows that the appliance is operating and AUTO appears
on the display.
Coffee starts to run off several minutes later than the set time to
allow for preheating of the machine, thus optimising the tempera-
ture of the coffee.
Cleaning and maintenance
Before performing any cleaning or maintenance operations, turn
the machine off, unplug it from the power socket and allow it to
cool down.
1. When cleaning the coffee maker, do not use solvents or abra-
sive detergents. A soft, damp cloth is sufficient.
2. Never immerse the coffee maker in water: it is an electrical
appliance.
fig. 9
