7
periods of operation will be visible.
• In this way, the appliance will function automatically
each day at the times set. (Important: the appliance must
always be connected to the power supply).
• To modify the settings, return the teeth to the initial
position and set the new operating periods.
• To turn the appliance off, turn the power selector to "0".
MAINTENANCE
Before carrying out any maintenance, disconnect the appliance
from the power supply and wait for it to cool down completely.
This appliance requires no particular maintenance.
It is sufficient to remove dust with a soft, dry cloth. Never use
abrasive powders or solvents.
If necessary remove areas of concentrated dirt with a vacuum
cleaner.
TECHNICAL CHARACTERISTICS
Power supply
See appliance rating plate
Power consumption
"
PROBLEM
CAUSE
SOLUTION
The appliance doesn’t
work
The plug is not inserted properly into the po-
wer socket or the socket switch is off.
Check for any obstruction.
The power selector is in the ”0” position.
The thermostat is set too low.
Timer setting.
Insert the plug into the power socket and
switch on if necessary.
Remove the obstruction, disconnect the po-
wer plug of the heater and let the appliance
cool down. If the problem persists, contact
customer experience.
Move the power selector to position MIN, MED,
MAX or MAX .
Turn the thermostat knob clockwise to higher
settings until the heater restarts.
Make sure the timer is correctly set to local
time and check the position of the teeth.
TROUBLESHOOTING
