DeLonghi HFX65V15CA, Инструкция по эксплуатации

Страница: 14 / 17

14
Electrical connection
Before plugging the appliance into the outlet, check that
the power supply corresponds to the value indicated on the
rating plate and that the power supply is adequate for the
load.
Operation and use
- Connect the appliance to the power outlet.
- The appliance emits a beep and the power indicator
light (G) also comes on and remains lit while power to
the appliance is on. The appliance goes into STAND-BY.
- Press the ON/STAND-BY button (A) to turn on the
appliance. It will begin to heat with the predefined
settings.
- Press the MODE button (F) to select one of the following
functions available:
l
Ventilation
In this operating mode only the fan operates, so the
appliance does not heat the room.
l
Anti-freeze
In this operating mode the appliance keeps the room
at a temperature of 7°C (45°F)
to prevent freezing
temperatures.
l
Heating 1 and Heating 2
In this operating mode you can set the desired
temperature by pressing the + and - adjustment
buttons (B).
-
Heating 1 (minimum power level):
The appliance operates at the minimum power, reducing
noise and energy consumption to the minimum.
- Heating 2 (maximum power level):
The appliance operates at the maximum power for rapid
heating of the room.
ECO PLUS function
In this operating mode the appliance will automatically set
the power level to guarantee the best comfort reducing the
energy consumption. In this operating mode the unit may
switch the heating power level from maximum to minimum
and vice versa, several times in an hour.
When using the ECO PLUS function, the maximum
temperature setting is 26 °C (79 °F). To activate this function,
press the ECO PLUS button (D).
Swivel button
If you want the appliance to distribute the airflow over a
larger area, press the oscillation button (C)
. The appliance
will then oscillate right and left. To stop the oscillation in the
desired position, just press oscillation button (C) again.
Turn the appliance off
To turn off the appliance press button ON/STAND-BY (A). The
display remains on for about 6 seconds. To completely turn off
the appliance, remove the plug from the socket.
Please note: The display can show the temperature in
both °F and °C. To change the temperature scale, press and
hold the + key for few seconds, then release. Please be in-
formed that as this is not a precision device. The temperature
shown may not correspond to the exact actual temperature.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the STAND-BY
position, press the timer button (E) .
The display shows the symbol and the time remaining
before switch-on. To set the timer, use the + and - adjustment
buttons (B), then wait a few seconds for the programming to
be set. The display returns to show for stand-by and the
symbol to indicate you have set the timer.
When the programmed time has been reached, the appliance
turns on with the same settings it had during the previous
operation.
Delayed shut-off: With the appliance on, press the timer
button (E) . The display shows the symbol and the
time remaining before shut-off. To set the timer, use the +
and – adjustment buttons (B), then wait a few seconds for
the programming to be set. The display returns to show the
current settings and the symbol to indicate you have set
the timer. When the programmed time as been reached the
appliance shuts off automatically. If you want to go back to
operation without the timer, press the timer button (E) twice.
The timer symbol disappears from the display.
Using the remote control
The remote control functions correspond to those on the
control panel. See the section “Operation and Use" on the
previous page for a description of the functions.
Inserting or replacing the batteries
- The remote control is
provided with a lithium
battery CR2032. To let
the appliance function,
remove the battery
cover strip, by pulling it.
- To replace the battery
remove the battery
cover by rotating it.
Fig. 1