9
PROBLEM
CAUSE
SOLUTION
PF
display
Temperature sensor is not working
properly
The product needs to be serviced, contact
our toll free number for assistance
Product doesn’t turn on
Check that the plug is connected to the
outlet
Delayed start timer is ON
Room temperature reaches the set
temperature
Plug in
Wait till set time elapses or press but-
ton (E) twice to cancel the delayed start
function and push button (A)
Use the “+” button to increase the set
temperature
The appliance shut off
The tip-over switch has been activated Make sure the appliance is standing
upright on a flat surface. If the problem
persists, contact our toll free number to
assist you
The display shows "
H
t
" blinking
The internal temperature is too high.
The air intake or outlet grille is
obstructed
Check the appliance is correctly
positioned respecting the minimum
distances from the wall, or objects, as
indicated in the instruction manual. If
not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet
and let the appliance cool down. After
a few minutes, plug the appliance in
again. If the appliance doesn't work
please contact the DeLonghi toll free
number
TROUBLESHOOTING
