1. LOCATION
Place heater on the floor beneath the coldest window in the room, or any other location. Your
heater will reduce the effect of cold drafts. The heater should not be placed immediately below a
power outlet. Do not use this radiator in rooms with a floor area of less than 43 square feet (4
sq.m.).
2. CONNECTION
The radiator should be connected to a properly polarized A/C 120 V household outlet in perfect
working conditions. Keep loose clothing or bedding, furniture and flammable material away from
the heater’s wall outlet.
3. TURNING ON TWO-SWITCH MODELS
Turn the thermostat clockwise to its maximum position. Push down both switches. The switch
lights stay on independently of the thermostat cycling. When room reaches the desired tempera-
ture, turn the thermostat knob counter-clockwise very slowly and carefully until you hear a click.
This should set your heater to maintain the desired temperature by cycling on and off as requi-
red. Note: The room may require up to an hour to reach the desired temperature depending on
room size and conditions.
4. USE OF THERMOSTAT
The thermostat operates according to room air temperature, rather than radiator temperature.
Turning it counter-clockwise to smaller numbers would decrease the temperature; clockwise to
greater numbers would increase the temperature.
Antifreeze function
Turn the thermostat dial to the position and push the switches on. The appliance will maintain
a minimum room temperature of approximately 41°F (5°C), thus preventing freezing while con-
serving energy.
REMINDER
To completely shut the heater off, MIN/MED switches must be set in the “0” position.
Your product is equipped with a polarized alternating current line plug (a plug having one blade
wider than the other). There is only one way it can be plugged into a power supply. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try again by turning it the
other way. If it would still not go in, it is probably due to an obsolete outlet which should be
replaced. Do not tamper with the plug or outlet to defeat the purpose of this safety mechanism.
WATT ECONOMIZER
To conserve energy, use the Min. or Med. position
after the unit has reached the desired operating tem-
perature
With pilot lights ON, the heater is ON!
9
Содержание H770715
Страница 6: ...5710810611 06 13_00 Printed in China ...
