DeLonghi GHS 260, Руководство по эксплуатации для пользователя

Страница: 10 / 12

10
The hob requires a space in the kitchen work surface as shown in the diagram Fig. 5.
A partition between the base of the hob and the cupboard below should be fitted
100 mm below the worktop if the cupboard is to be used for storage.
Note that the hob should be positioned 50 mm from the rear of the kitchen worktop.
560
580
500
480
50
figure 5
figure 6
;;;
;;;;;;;;;
;;;;;;;;;
20 mm min. 40 mm max.
B
C
A
• Spread out the gasket “C” over the
workbench at the edge of the cut out
taking care to overlap the gasket at the
corners.
• Slot in the cooking hob into the cut out
of the workbench and locate it correctly.
• Adjust the clamps “A” and tighten the
screws “B” until the hob is firmly
secured.
• Using a sharp tool, trim any excess
gasket which protrudes from the edge of
the hob.
Hob installation