29
CHANGING THE MENU SET-
TINGS
CHANGING THE MENU SETTINGS
1. Press the P button to enter the menu;
2. Turn the selection knob until the light
comes on;
3. Press the button to select the func-
tion. The OK light flashes;
4. Press the button to start rinsing (or
the button to cancel the operation).
The light flashes .
5. After rinsing, the appliance automatically exits
the menu and is ready to make coffee.
NB!
Unlike automatic rinsing, manual rin-
sing can be interrupted at any moment by pres-
sing the button.
Descaling
1. Press the P button to enter the menu;
2. Turn the selection knob until the light comes
on;
3. Press the button to select the function (or
the button to exit the menu); The OK
light flashes ;
4. Perform descaling as described in the section
"Descaling" (page 35).
Setting the temperature
1. Press the P button to enter the menu;
2. Turn the selection knob until the light comes
on;
3. Press the button to select the function
(or the button to exit the menu);
4. Turn the selection knob until the lights corre-
sponding to the required temperature come
on:
LOW ;
MEDIUM ;
HIGH ;
5. Press the button to confirm the selec-
tion (or the button to cancel the ope-
ration);
6. Press the button to exit the menu.
Auto-Off
1. Press the P button to enter the menu;
2. Turn the selection knob until the light
comes on;
3. Press the button to select the function
(or the button to exit the menu);
4. Turn the selection knob until the lights corre-
sponding to the number of hours before the
appliance goes off automatically come on:
1 HOUR ;
2 HOURS ;
3 HOURS ;
5. Press the button to confirm the selec-
tion (or the button to cancel the ope-
ration);
6. Press the button to exit the menu.
Setting water hardness
1
Press the P button to enter the menu;
2. Turn the selection knob until the light
comes on;
3. Press the button to select the func-
tion (or the button to exit the menu);
4. Turn the knob until the water hardness mea-
sured using the indicator strip is displayed
(see section "Setting water hardness" on page
36);
LEVEL 1;
LEVEL 2;
LEVEL 3;
LEVEL 4
5. Press the button to confirm the selec-
tion (or the button to cancel the ope-
ration);
Resetting factory default values
(reset)
Resetting factory default values (reset)
1. Press the P button to enter the menu;
2. Turn the selection knob until the lights come
on ;
3. Press the button to select the func-
tion (or the button to exit the menu).
The OK light flashes;
4. Press the button again to restore the
original settings.
Installing the filter
Certain models are provided with a water softener
filter. If this is not the case with your model, you
are recommended to purchase one from an autho-
rised technical service centre.
29
GB
