DeLonghi ECAM23.46X, Инструкция по эксплуатации

Страница: 14 / 25

13
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1) To enable this function, press the button (B5).
"RINSING, Please wait" appears on the display (B1);
2) After a few seconds, hot water is delivered first from the
coffee spouts, then from the hot water spout (if inserted)
to clean and heat the appliance’s internal circuit. "RINSING"
appears on the display, together with a progress bar which
fills gradually as preparation proceeds;
3) To stop the process press any button or wait for delivery of
water to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coffee grounds container
(A14) to contain water.
10. MAKING COFFEE
10.1 Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the aroma selection button
(B6) (fig. 8) repeatedly until the required taste appears on the
display (B1).
10.2 Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, turn the selection dial
(B2) (fig. 7) until the message corresponding to the required
quantity of coffee appears on the display (B1):
Coffee selected Quantity in cup (ml)
MY COFFEE Programmable:
from
≃
20 to
≃
180
SHORT
≃
40
STANDARD
≃
60
LONG
≃
90
EXTRA LONG
≃
120
10.3 Customising the "my coffee" quantity
The appliance is set by default to automatically deliver 30ml of
"my coffee". To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (A14) (fig. 9);
2. Turn the selection dial (B2) (fig. 7) until "MY COFFEE" is
displayed;
3. Press and hold the button (B7) (fig. 10) until the
message "1 MY COFFEE Program quantity" appears on the
display (B1) and coffee delivery begins. Then release the
button;
4. As soon as the coffee in the cup reaches the required level,
press the button (fig. 10) again.
The quantity of coffee in the cup has now been programmed.
10.4 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A2) (fig. 11).
Please note:
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be deliv-
ered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
10.5 Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle before delivery by pressing the
button (B5)
,
as described in section “10. making coffee”;
• warm the cups with hot water using the hot water function
(see section “12. Hot water”);
• select the "high" coffee temperature in the menu (see sec-
tion “8.8 Setting the temperature”).