background image

23

DISPlAYED MESSAGE

POSSIBlE CAUSE

REMEDY

Press CLEAN button

• 

Milk has been delivered recently and the 

tubes inside the milk container must be 

cleaned. 

• 

Press the CLEAN button and keep it 

pressed until the progress bar which 

appears on the display together with the 

message “Cleaning...” is complete.

INSERT WATER SPOUT

• 

The hot water spout is not inserted or is 

inserted incorrectly. 

• 

Insert water spout as far as it will go. 

INSERT MILK 

CONTAINER!

• 

The milk container is not inserted 

correctly.

• 

Insert the milk container as far as it will 

go. 

TROUBlESHOOTING

Below is a list of some of the possible malfunctions.  

If the problem cannot be resolved as described, contact Customer Services. 

PROBlEM

POSSIBlE CAUSE

REMEDY

The coffee is not hot 

• 

The cups were not preheated.

• 

Warm the cups by rinsing them with hot 

water (N.B. you can use the hot water 

function). 

• 

The infuser has cooled down because 

2/3 minutes have elapsed since the last 

coffee was made. 

• 

before making the coffee, warm the 

infuser by pressing the  

 button .

• 

Low coffee temperature is set. 

• 

In the menu, set a high coffee 

temperature. 

The coffee is thin or 

not creamy enough. 

• 

The coffee is ground too coarsely.

• 

Turn the grinding adjustment knob one 

click anticlockwise towards “1” while 

the coffee mill is in operation (fig. 10). 

Continue one click at a time until coffee 

delivery is satisfactory. The effect is only 

visible after delivering 2 coffees (see the 

section: “Adjusting the coffee mill” on 

page 13).

• 

The coffee is unsuitable. 

• 

Use pre-ground coffee for espresso 

coffee makers

The coffee is delivered 

too slowly or a drop at 

a time. 

• 

The coffee is ground too finely.

• 

Turn the grinding adjustment knob 

one click clockwise towards “7” while 

the coffee mill is in operation (fig. 10). 

Continue one click at a time until coffee 

delivery is satisfactory. The effect is only 

visible after delivering two coffees. (see 

the section “Adjusting the coffee mill” on 

page 13).

Coffee does not come 

out of one of the 

spouts.

• 

The spouts are blocked. 

• 

Clean the spouts with a toothpick (fig. 

26B).

The milk does not 

come out of the milk 

spout.

• 

The milk container lid is dirty.

• 

Clean the milk container lid as described 

in the section “Cleaning the milk 

container”.

Содержание ECAM23.450


























Отзывы: