To enter the DISPLAY test:
Plug the machine ON.
Press and hold: 1 Steam buttons
Press On/Off Switch (position I)
Turning the knob,
the display will show
the bar increasing
or decreasing.
DISPLAY TEST PROCEDURE
Pressing each icon the display
will show following message
icon
message
Note
: Release buttons after you read the
message “DISPLAY TEST MODE”.
DISPLAY TEST PROCEDURE FOR
ECAM23.420
INTENSA
To EXIT the procedure, press On/Off Swicth (position 0) or unplug the machine.
NOTE
: After display Test performing, you need to intialize the machine.
BUTTON 1
BUTTON 2
BUTTON 3
BUTTON 4
BUTTON 5
BUTTON 6
BUTTON 7
Test procedure ends automatically 1 minute after you completed it.
