15
Turning on the Appliance
Starting a wash cycle...
Draw out the lower basket load the dishes and push back. Repeat for the
upper basket. It is recommended that you load the lower basket first than the
upper one (see the section entitled “L oadi ng the Di shwasher”) .
Pour in the detergent (see the section entitled “Salt, Det ergent and Rinse Aid”).
Insert the plug into the socket. The power supply is 220-240
VAC 50 HZ, the specification of the socket is 10 A 220-240 VAC.
Make sure that the water supply is turned on to full pressure.
Open the door,press the ON/OFF button,the ON/OFF light will turn o n.
Press the "prog." button to select the desired wash cycle (see Wash Cycle table on page14)
7 With a little force to ensure the door is properly closed.
8 When the washing is over, you can shut off the switch by pres sing ON/OFF but ton
NOTE: A click could be heard when the door is closed perfectly. .
Premise: A cycle that is underway can only be modified if it
has only been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may have
already drained the wash water. If this is the case, the detergent
dispenser must be refilled (see the section entitled " Loading the
Detergent " ).
Open the door,Press current prog. Button more than three
seconds to cancel the program ,then you can change the
program to the desired cycle setting (see the section entitled
" Starting a wash cycle. . . " ). Then, close the door.
NOTE: If you open the door when washing, the machine
will pause. When you close the door , the machine will
keep on working after 10 seconds.
The 7 program lights shows the state of the dishwasher:
1
2
3
4
5
PROG.
6
Содержание DW97AU
Страница 1: ...DW97AU DeLonghi...
