12
12
1 - INSTALLATION
45
0 m
m
50 mm
65
0 m
m
500 mm
Fig. 1.1
This cookers has class “2/1” overheating protection so that it can be installed in a
cabinet.
The appliance must be kept no less than 50 mm away from any side wall which exceed
the height of the hob surface (fig . 1 .1) .
The furniture walls adjacent to the cooker must be made of material resistant to heat .
The veneered syntetical material and the glue used must be resistant to a temperature of
150°C in order to avoid ungluing or deformations .
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a
room containing a bath or shower .
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides .
It is essential that the cooker is positioned as stated below .
We do not recommend the cooker is located on a plinth . If this is unavoidable, it will be
necessary to provide safety measures to prevent the appliance falling off.
The cooker must be installed by a qualified technician and in compliance with a
local safety standards.
