DeLonghi DRS 900-G, Руководство пользователя и инструкция по установке

Страница: 41 / 44

41
ELECTRICAL FEEDER CABLE REPLACEMENT
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
To connect the supply cable:
• Remove the screw securing the cover “
A
” on the rear of the cooker (fig. 10.2).
• Unscrew cable clamp “ D ” (fig. 10.3).
• Connect the wires to the terminal block “ B ” as shown in the diagram in figure 10.4.
• Take up any slack in the cable and secure with the cable clamp “ D ”.
• Replace the cover “ A ”.
NOTE: The earth conductor must be left about 3 cm longer than the others.
FEEDER CABLE SPECIFICATIONS
Type “H05V2V2-F”
230 V~ 3 x 0,75 mm
2
A
D
B
Fig. 10.3 Fig. 10.2
230 V
PE N L
1
(L
2
)
Fig. 10.4