5
Programming the Electronic Timer
The timer allows you to set two programs in a 24h period.
To program the timer:
Press the “Timer function
A
“ (
2
) ; this accesses the program and the following is displayed:
- The flashing message “--:--“;
- The message “
ON
” at the bottom left (ON time setting);
- The symbol “
A
” at the right indicating that the first program controlling is
being set;
To setting the starting time press “
hour
button” (
9
) to set the hour and “
min
button” (
8
) to set the minutes, then confirm the
ON
time by pressing the
“Timer function
A
” (
2
) button again. The words “
OFF
” and “
00:00
” appear
on the display.
- Set the time you want the appliance to go off using the “
hour
button” (
9
)
and “
min
button” (
8
), then confirm the off time by pressing the “Timer
Function
A
” (
2
) button again (fig.5).
- At this point, the word “
AUTO
” appears at the top of the display and the
“
TIMER ON
” (
3
) indicator light comes on to indicate that the appliance is
ready to operate at the programmed time maintaining the preset comfort
temperature.
- To set the program
B
press “Timer function
B
” (
4
) button and follow the
same procedure as described for the program
A
.
- Use the “ +” (
6
) or “ -” (
5
) buttons to set the desired comfort tempera-
ture, as described above.
- When set in this way the heater will automatically switch on at the set time
for the designated time period and automatically maintain the preset com-
fort temperature.
To cancel a preset programme, press the timer button
A
or
B
once and then press
the hour button until the display shows “--:--“ (fig.6).
Remote Control Operation
- When you press the the frost protection push button, the
radiator will set the temperature to 5°C and will switch on automatically only if the room tempera-
ture falls below 5°C, thereby preventing freezing, at minimum energy consumption.
The “Timer ON” light on the control panel will flash.
- Press the increase/decrease temperature button (+/-) to adjust the temperature from 5°C to 35°C.
- The “Off” button switches off the appliance.
Every time you press a button, the appliance will confirm the selection with a “beep” and the pilot
light on the remote control will illuminate.
AUTO
1
2
3
4
5
6
7
8
9
10
fig. 5
fig. 6
OFF
+
-
Frost protection button
Increase temperature
button
Decrease temperature
button
Pilot light
Содержание DRAGON 3
Страница 2: ...2 1 2 3 4 5 6 7 8 9 10...
