B
efore starting up the appliance
Before connecting the appliance to the main outlet, check that the transparent
hose inside the tank is correctly fastened (see Fig.1).
P
lace the dehumidifier in a suitable position, a
halfway or landing are generally good sites
The appliance must be positioned so that the air intake and air outlet grills are at least
20 inches away from any wall or obstacle to ensure adequate ventilation.
Condensate can be drained in one of two ways:
A)
D
ischarge into the tank
Your unit is supplied with a tank, which is positioned on the left side
(Fig. 2) of the unit to accumulate water removed from the air.
The condensate generated by the dehumidifier can be discharged
directly into the tank. The tank is easy to extract when it needs to be
emptied without spilling.
Note: make sure the tank is in position and the pump switch is in the
OFF position.
IMPORANT: The water collected is not drinkable. Please throw it away.
B)
D
irect draining
T
he exclusive Condensation Removal System, allow you to use a hose that extends 16 feet
(4.9 m) in height to drain the water. If you want the water to flow directly to a drain, connect
the condensation discharge tube supplied to the connection pipe located on the lower part
of the unit (Fig.3-4). Turn then the pump switch to ON.
Note: With the condensation discharge hose missing and the pump switched ON, a safety
device will make the machine discharge directly into the tank.
R
ubber cup
It is possible to make the condensation discharge tube pass through a hole, ø 9 mm. in size
(0,35 ins), by utilizing a window frame. At the end of the season, the rubber cap supplied
can be used to close the hole from the exterior side.
1 PUSH
2
ENGLISH
5
I n s t a l l a t i o n
fig. 2
How to
connect
How to
disconnet
fig. 4
fig. 3
fig. 1
Slide
5748007600 DH100P GB 29-04-2003 10:55 Pagina 5
