20
FASTENING THE COOKTOP
Each cooktop is supplied with a set of tabs and screws to fasten it on units with a working
surface from 3 to 4 cm deep.
The kit includes 4 tabs “
A
” and 4 self-threading screws “
B
” (fig. 3.4).
•
Cut the unit.
•
Turn the hob upside down and rest the glass side on a cloth.
•
Spread the seal “
C
” around the edge of the hob (fig. 3.5).
•
Put tabs “
A
” into the mountings; only tighten screws “
B
” a few turns.
Make sure that the tabs are mounted correctly as shown in the figures 3.4, 3.5.
•
Put the cooktop into the hole cut into the unit and position it correctly.
•
Put tabs “
A
” into place, tooth “
D
” of the tabs should go into the hole.
•
Tighten screws “
B
” until the cooktop is completely secured.
•
Using a sharp tool cut off the part of gasket “
C
” which protrudes from the cooktop. Take
care not to damage the workbench.
30 mm min.
40 mm max.
A
D
B
C
A
A
A
A
C
Adhesive side
Fig. 3.5
Fig. 3.4
