15
TILTING GRILL
■
The grill is secured to the rear wall of the oven on a hinge system that allows it to be
lowered to allow proper access when cleaning the oven ceiling (fig. 12).
■
To lower the grill element: use a flat-head screwdriver or a small coin to loosen the
element fixing screw (fig. 11).
■
When you have finished cleaning the oven ceiling, raise the grill element and screw
the element fixing screw back onto the stud. Make sure that the fixing screw is tighte
-
ned and the element is held securely in place.
■
The grill element itself is self-cleaning.
Fixing screw
Stud
Figure 11
Figure 12
Figure 10
GREASE FILTER
■
A special screen is provided at the
back of the oven to catch grease par-
ticles, mainly when meat is being roa-
sted (fig. 10).
■
Clean the filter after any cooking!
The grease filter can be removed for
cleaning and should be washed regu-
larly in hot soapy water (fig. 10).
■
Always dry the filter properly before fit
-
ting it back into the oven.
CAUTION:
When baking pastry etc. this
filter should be removed.
