13
Air filtration
If the EPA filter (A7) is installed, in addition to operating in the
preset mode, the appliance will also filter the air in the room. In
this case, the symbol (C2) will appear on the display.
The filter is designed to last up to 9 months, based on 8-hour
daily usage at medium working load.
To maintain the efficiency of filtration, see paragraph “5.3
Replacing the EPA filter”.
9.1 Dehumidifying mode
1. Touch the
button (B3). The symbol (C9) will
blink on the display (fig. 7).
2. The display shows the previously set relative humidity
value. When the symbol blinks, the setting can be
changed by repeatedly touching the
button.
There are 9 different relative humidity settings ranging
from 30% (dry environment) to 70% (humid environment).
Depending on the environmental conditions, it may not be
possible for the appliance to reach the minimum settable
value. In these cases, it is recommended the heat the
environment that needs to be dehumidified.
3. When the symbol stops blinking, the display shows the
percentage of relative humidity in the room. The appliance
may take a few seconds to display the value of the relative
humidity in the room.
4. When the room reaches the preset relative humidity level,
the appliance stops dehumidifying and operates at a very
slow ventilation speed.
9.2 Dry mode
1. Touch the
button (B6). The display shows the
symbol (C7) (fig. 8).
Please note:
The appliance automatically operates at the maximum
dehumidifying capacity. Recommended for particularly humid
environments or to dry laundry more quickly.
9.3 Ventilation mode
1. Touch the
button (B2). The display shows the
symbol (C3) and the selected speed (fig. 9).
2. When the symbol blinks, the ventilation speed can be
adjusted by repeatedly pressing the
button. the
display shows the number corresponding to the selected
speed (1
⇒
LOW; 2
⇒
MED; 3
⇒
HIGH).
9.4 Swing function
1. Press the button (B5)
. The air outlet louver (A1)
moves up and down, evenly distributing the air flow in the
room (fig. 10).
2. To stop the louver in the desired position, touch the same
button again.
9.5 Timer function
The timer can be used to delay appliance start-up and shut-
down. This will avoid energy wastage, ensuring the appliance
operates only when needed.
The timer function can be programmed from either the control
panel or the app.
• If programmed from the control panel: the display shows
the symbol (C12) (fig. 11).
• If programmed from the app: the display shows the
symbol (C11) (fig. 12). To programme the timer from the
app, follow the instructions provided in the app.
How to programme delayed start-up
1. With the appliance in stand-by (
), touch the
button (B7): the display will show the symbol and the
number relative to the selected hours (fig.11);
2. Set the desired number of hours by repeatedly touching
the
button.1, 2, 4, 6, 8, 12 hours can be selected.
3. After a few seconds, the appliance will return to stand-by
mode and the symbol will remain lit on the display.
4. After the programmed time, the appliance will turn on in
the previously set operating mode.
How to programme delayed shut-down
1. While the appliance is running, touch the
button
(B7): the display shows the symbol and the relative
number of selected hours (fig. 11);
2. Set the desired number of hours by repeatedly touching the
button. 1, 2, 4, 6, 8, 12 hours can be selected.
3. After a few seconds, the display returns to the current
operating mode and the symbol remains lit.
4. After the programmed time, the appliance will
automatically turn off.
Please note:
• Once the timer has been programmed, to see the remaining
time until start-up or shut-down, touch the
button once.
• To deactivate the timer function, press the
button
twice. The symbol on the display will turn off.
9.6 Wi-Fi function
The appliance has a built-in Wi-Fi function. To activate or
deactivate this function, hold the
button (B4) pressed
until the appliance emits two beeps. When the Wi-Fi function is
active, the display will show the Wi-Fi symbol (C5) with the
following operating modes:
-
FIXED
this means the Wi-Fi functions are active and the
“Home WLAN” has been found
-
SLOW FLASHING
this means the appliance is searching for the
“Home WLAN”
Содержание DDSX 220WF-WH
