8
description/use
en
descrIptIon
(see fig. 1)
a
ON/STAND-BY button
B
+/- adjustment buttons
c
MODE button (selects the operating mode)
d “
ECO plus” button
e
Timer button
f
Swing button
g
Remote control receiver
H
Indicator light
I
Air intake grille
J
Filter
use
Installation
- The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the
same socket for other appliances.
electrical connection
-
Before plugging the appliance into the mains socket, check
that the mains power supply corresponds to the value indi-
cated on the rating plate and that the mains power supply
is adequate for the load.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EEC
ON RADIO INTERFERENCE SUPPRESSION.
operation and use
1.
Plug into the mains socket.
2.
The appliance emits a beep. The indicator light (
H
) co-
mes on and remains lit while the appliance is powered.
3.
The appliance switches to stand-by. A dot flashing on
the display means the tip over device has been activa-
ted. See paragraph: “Safety functions”.
4.
Press the ON/STAND-BY (
a
) to turn the appliance on.
It begins heating the room according to the current set-
tings.
5.
Press the MODE button (
c
) to select one of the following
operating modes:
fan
freeze prevention
Heating 1
Heating 2
Heating 3
5.1 fan
In this mode, only the fan operates and the appliance does
not heat the room.
5.2 freeze prevention
In this mode, the appliance keeps the room at a temperature
of 7°C to avoid freezing.
5.3 Heating 1, 2 and Heating 3
In this mode, the desired temperature can be selected by
pressing the adjustment b and – (
B
):
-
Heating 1 (low power)
The appliance operates at low power, reducing noise
levels and energy consumption to a minimum.
-
Heating 2 (medium power)
The appliance operates at medium power.
-
Heating 3 (high power)
The appliance operates at high power to heat the room
rapidly.
6.
“
eco plus” function
The
“
ECO plus” function is available in Heating 1, 2 and 3
modes only.
To activate the function, press the
“
ECO plus” button (
d
).
When this function is active the appliance automatically sets
the most appropriate power level to guarantee optimum
comfort while reducing energy consumption.
While the
“
ECO plus” function is active, the appliance may
switch automatically to a lower heating power than the one
displayed. This may happen a number of times in an hour.
7.
To distribute the air flow over a wider surface, press the
swing button (
f
)
. The appliance starts swinging to
the right and left. To stop the appliance in the desired
position, simply press the swing button (
f
) again.
8.
To turn the appliance off, press the ON/STAND-BY button
(
a
). The display may visualize a countdown for about 6
seconds.
please note:
Room temperature can be displayed in either
°C or °F. To change the unit of measurement for the tempera-
ture, press the + button for a few seconds, then release.
digital 24 h timer
This function can be activated from any operating mode.
auto-start:
with the appliance in STAND-BY, press the timer
button (
e
) . The symbol is displayed together with
the time remaining before the appliance comes on. To adjust
the timer, use the adjustment b and - (
B
), then wait
a few seconds for the setting to be memorised. The stand-by
light (
H
) is displayed together with the symbol, indicating
that the timer has been set. When the programmed time
