5
OPERATION AND USE
1.Turn unit on by selecting Min, Med or Max setting. This switch controls the heat on the
heat settings knob. The Max setting will produce the most heat. A red indicator
light will come on and this light will stay on as long as the unit is turned on.
2. Set the desired room temperature by turning the thermostat dial between 45°F and 95°F
(see conversion chart for Celsius degree).
When the desired temperature is reached, the unit will automatically maintain that
temperature. It is normal for the heater to cycle on and off as it maintains the preset tem-
perature. You will need to raise the thermostat setting to avoid cycling.
ANTIFREEZE FUNCTION
This setting will automatically turn the heater on if the room temperature falls below
42°F, to prevent it from freezing, at mimum energy consumption. This function is not guaran-
teed in the event at black outs even if lasting just a few seconds. To set, turn the thermostat
control to , and the fan control to any setting.
MODELS WITH MOTORIZED ROTATING BODY
This appliance is fitted with a motorized base and a rotating body.
To distribute the air flow over a larger area, press the oversized switch (Fig. 2).
When activated, the element (single version) or element (twin version) will oscillate from
right to left please do not manually turn the grill(s). To terminate oscillating, simply press the
oversized switch again.
MODELS WITH MANUAL ROTATING BODY
This appliance is fitted with a manual rotating body. Position the element(s) at the desired
angle before turning on the appliance. Do not rotate while indicator light is on. Allow the
unit to cool down before repositioning the element(s).
AIR FILTER (REAR OF THE UNIT)
The air filter should be cleaned periodically for maximum performance of your heater.
Remove by pressing down on the tab and pulling the grill towards you.
Fig.2
