![DeLonghi D814WM17 Скачать руководство пользователя страница 30](http://html.mh-extra.com/html/delonghi-0/d814wm17/d814wm17_installation-instructions-manual_2470910030.webp)
GB
30
hints and tips
Issues
Solutions
Buttons don’t work.
• Child lock is activated. Deactivate the child lock function.
• The washing machine is operating a wash programme.
• The
Programme Dial
was turned to a different programme.
Door doesn’t open.
• Door lock may be active.
• The water temperature or level could be too high.
If you start a wrong
programme accidentally.
If you need to change a setting after the wash has started, turn the
power
OFF
then
ON
again. Re-select the programme, spin speed
and optional functions, and then press the
Start/Pause
button.
(Note: We suggest that you do not change the programme after the
machine has been running for 3 minutes.)
Unusual odour.
• Rubber parts and the motors may give off a smell when you first
start using the washing machine, but this goes away over time.
• You should wash the drum once a month.
You can’t see any water.
This is normal: The water level is below the window.
There’s no water going into
the washing machine.
• The water tap might be turned off.
• The water hose or water-supply hose may be frozen.
• Your water supply may be disrupted.
• The water-supply valve filter may be clogged.
There’s only a small
amount of water.
• If you have paused the programme and you restart, the washing
machine may drain some water.
• Don’t pour water in through the door.
Water adds up during
washing.
This is normal: water is supplied automatically as the level lowers,
and with heavy loads the water may fill up repeatedly.
The washing machine
does not spin.
• The rinse hold may be active. Select the
Spin Speed
to continue.
• If a small load is in the washing machine, it may be detected as
an unbalanced load and may stop spinning after a number of
attempts. Select the manual spin.
There’s no water going
into the washing machine
during rinse operation.
Before rinsing, the washing machine spins to drain water remaining
from the wash. The water will fill up after that.
During the spin-dry, the
drum stops and rotates
several times.
This is normal. The washing machine has detected an unbalanced
load and is trying to correct it.
Foam and water remain in
the door or door seal.
Although foam and water may remain, it does not have any
influence on the performance of a rinse.
Spin starting is repeated.
This is normal. Although spin starting may be repeated, it is a
function made to spin quietly.
D814WM17_IB_2L_RC_190904_grace.indb 30
4/9/2019 7:12 PM