GB
25
wash setting
standard washing
1. Pull the door handle and put the laundry in the drum. (Refer to Preparation to sort your laundry
before it goes into the drum.) Make sure no washing gets caught in the door.
2. Close the door and press the
Power
button.
3. Turn the Programme Selection Dial to select your wash programme.
4. Select the water temperature, spin speed and other functions if desired.
5. Press the
Function
button continuously to select other washing options. Other washing options
are:
• prewash: to perform an extra wash before main wash
• extra rinse : to perform an extra rinse once
6. Press the
Soil Level
button repeatedly to select the dirt level of the wash.
7. Add detergent into the detergent drawer. The quantity of detergent will depend on the amount of
laundry, the degree of soiling and the water hardness. Use the amount of detergent suggested
on the packaging.
8. Press the
Start / Pause
button to start the washing.
9. The washing machine will sound when the programme is complete.
removing washing (once programme is finished)
• Open the washing machine door and remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and detergent drawer open so that residual water can evaporate.
If the door is locked and you switched the washing machine off and then on - or if there’s a
power cut - it will stay locked for 1 minute.
Door remains locked for 1 minute after wash stopped.
adding laundry during wash
You can still add laundry into the unit while it is running a programme. Make sure to follow the
procedures below in order to avoid being scalded by the hot water in the drum.
1. Press the
Start/Pause
button for 3 seconds.
2. Wait until the
indicator is light up to signify you can add your laundry. For safety, you should
still check if the drum has stopped rotating and if the door is unlocked.
The machine may not unlock the door for adding laundry when there is too much water or
when the temperature is too high in the drum.
3. Open the door carefully, be alert of the hot water in the drum.
4. Add the laundry carefully into the drum and close the door.
5. Press the
Start/Pause
button to resume the programme.
D7-8-9-1014PWM19_IB_2L_RC_190902_grace.indb 25
2/9/2019 6:31 PM