DeLonghi CKS1660D, Инструкция по эксплуатации

Страница: 11 / 15

10
COOKING WITH HIGH FUNCTION
1. Place the unit on a clean, dry counter.
2. Remove glass lid.
3. Fill the pot with ingredients.
4. Replace lid.
From stand-by mode, turn the Function Selector Dial (A) to se-
lect MEDIUM function.
The display will default to h04:00m flashing, than adjust cooking
time by pressing Time + / - push buttons (C).
Each pressing of + button will increase the time in increments of
15 minutes, for a maximum set time of h08:00m.
Each pressing of - button will decrease the time in increments of
15 minutes, till h00:30m.
K button pressed for 2 seconds the display will auto-
matically increase the time, with 30 minutes increments until
the button is released.
Keeping - button pressed for 2 seconds the display will automat-
ically decrease the time, with 30 minutes increments until the
button is released.
Pressing Start/Stop button (D) the selected cooking function is
started, the red light (E) around Start/Stop button will illumi-
nate. If Start/Stop button (D) is not pressed within 20 seconds,
the control goes in stand-by mode.
The display will stop flashing and the timer starts countdown.
It is possible to stop the function anytime by pressing Start/Stop
button (D). The red light (E) around Start/Stop button will turn
off, the display will default to stand-by mode.
Once set time is elapsed, cooking has ended, the red light (E)
around Start/Stop button will shut off, the display will show
“End” flashing for 5 minutes.
While “End” is flashing you can reset the control by pressing
Start/Stop button (D). The control goes into stand-by mode.
If no action is taken after 5 minutes flashing, the control will au-
tomatically default to KEEP WARM mode.
Keep warm red light (F) will illuminate, the red light (E) around
Start/Stop button will illuminate.
Once Keep Warm function maximum of 12 hours timing has
elapsed, the control will turn off and will go into stand-by mode.
KEEP WARM FUNCTION
Keep Warm automatic selection
Keep Warm function is automatically activated at the end of
cooking time for each function.
Once the function time has elapsed, the “End” message flashes
for 5 minutes, the Keep Warm function will automatically turn
on, the Keep warm red light (F) and red light (E) around Start/
Stop button will be illuminated , and the display will show a
time count up from h00:00m to h12:00m, with 1 minute incre-
ment. So you will know how long the keep warm function has
been activated.
If no action is taken, after 12h elapsed the control will turn off,
and will go into stand-by mode. The Keep warm red light (F) and
red light (E) around Start/Stop button will shut off.
Keep warm manual selection
Keep Warm function can be also manually activated pressing
Keep Warm button (B) .
From stand-by mode (or active mode but not while any cooking
function has already started ) function can be activated by press-
ing Keep Warm button (B).
Keep warm red light (F) will be illuminated , the display default
to active mode and show h00:15m.
Further pressing of Keep Warm button (B) will disable the func-
tion: the control returns in active mode, Keep warm red light (F)
will be turned off and the display will show the default selected
function setting for 20 seconds.
If no action after this time the control will returns in Stand-By
mode.
It is also possible to disable the Keep Warm function (if not
already started) turning the Function Selector Dial (A): Keep
warm red light (F) will be turn off and the control will go into
active mode, showing default condition for each function for 20
seconds. If no action after this time the control will returns in
Stand-By mode.
When Keep Warm function is selected , time can be adjusted
from h00:15m to h12:00m , in increments of 15 minutes by
pressing Time + / - buttons (C).
K button pressed for 2 seconds the display will auto-
matically increase the time, in increments of 30 minutes until
the button is released.
Keeping - button pressed for 2 seconds the display will automat-
ically decrease the time, in increments of 30 minutes step until
the button is released.