Replace the tank by connecting the valve at the bottom of the tank
with the hole in the base on the machine.
The tank may also be filled without it being removed by filling with
water from a carafe.
NB: Never use the appliance without water in the tank and always
remember to top up when the level drops to a couple of centimetres from
the bottom (fig. 7).
PREHEATING THE COFFEE UNIT
To obtain espresso coffee at the right temperature, the coffee machi-
ne must be preheated.You are therefore recommended to press the
ON/OFF button (fig. 8) at least 15 minutes before preparing the cof-
fee,
making sure the filter holder is attached to the applian-
ce
(check that the steam knob is closed).
To attach the filter holder, position it under the boiler outlet with
the handle towards the left (see fig. 9), push it upwards and at the
same time
rotate the handle firmly
towards the right.Wait for 15
minutes, then make the coffee as described in the following chapter.
Alternatively, you can preheat more rapidly by proceeding as follows:
1. Turn the appliance on by pressing the ON/OFF button (fig. 8) and
attach the filter holder to the appliance
without adding ground
coffee
.
2. Place a cup under the filter holder. Use the same cup as will be
used to prepare the coffee in order to preheat it.
3. Wait for the temperature OK indicator light to come on (fig. 10),
then immediately press the coffee knob (fig. 11). Run the water off
until the temperature OK indicator light goes out, then interrupt
delivery by pressing the coffee button again.
4. Empty the cup. Wait until the temperature OK indicator light
comes on again then repeat the same operation.
(It is normal for a small and harmless puff of steam to be given off
when removing the filter holder).
1
2
fig. 7
fig. 8
fig. 9
fig. 10
Coffee Maker
5
fig. 11
Содержание BCO255
Страница 1: ...instr uctions Coffee Maker BCO255...
Страница 2: ...Coffee Maker 2...
Страница 15: ...518IDL 05 06...