DeLonghi 0132127008, Инструкция по эксплуатации

Страница: 13 / 20

12
5.8 Cleaning the burrs
When cleaning the beans container, clean the container housing
and upper burr with a damp cloth. The burr can be removed and
replaced by an authorised customer services centre.
You may also need to remove the burr if it becomes blocked with
foreign matter. If this occurs, clean as follows:
1. Empty the beans container (if necessary, using a vacuum
cleaner to remove any remaining beans).
2. Attach the portafilter and operate the grinder without beans
to free the coffee guide, then attach the portafilter to the
outlet of the coffee grinder (A18), lining it up with “INSERT”,
then turning it to the right. Grinding begins when the por-
tafilter reaches the CLOSE position and stops automatically;
3. Turn the appliance off;
4. Release the beans container by turning it anticlockwise and
extract from the appliance;
5. Turn the grinding selector anticlockwise as far as it will go
to the “REMOVE” position (fig. 21).
21 22
6. Extract the upper burr, gripping it by the handle (fig. 22).
7. Clean the burr with the brush (C12) (fig. 23) and remove
the coffee residues using a vacuum cleaner (fig. 19).
8. Put the upper burr back in place:
23 24
9. Insert the burr in its housing (fig. 24);
10. Turn the selector to select the desired grinding level (fig.
25);
11. Make sure the burr is inserted correctly by pulling it by the
handle. If it is correctly inserted, it will not move;
25
12. Clean the beans container housing with a damp cloth and dry;
13. Put the container back (fig. 20).
5.9 Replacing the burrs
When the quantity of coffee becomes even less, contact a cus-
tomer services centre to have the burrs replaced, then adjust the
grinder again as follows entering the setting menu (“3. Menù
settings”) and selecting the first range of the “Extra grinding ad-
justment”. Then turn the ground coffee quantity dial (B2) to min-
imum position and set the dose like a first use (see Quick Guide).
5.10 Cleaning the “Smart tamping station”
To guarantee top quality grinding, clean the “Smart tamping
station” regularly as follows:
1. Clean the attachment area with the brush (C12) (fig. 26).
26 27
Pull the lever (A20) as far as it will go and clean the internal tam-
per with a brush (fig. 27). Then release the lever.
Use the tube brush (C11) to clean the coffee funnel (fig. 28).