-
-
Description
This Delock network switch can be used for connection of up to 4 devices to the
RJ45 port and thus you can connect your devices by another port to your LAN.
By using one of the 4 buttons you can manually select which device should be
connected to the LAN. Therefor you do not need a power supply.
Specification
• Connector:
Input: 4 x RJ45 Ethernet female
Output: 1 x RJ45 Ethernet female
• Data transfer rate:
Ethernet up to 10 Mb/s (Half/Full Duplex)
Fast Ethernet up to 100 Mb/s (Half/Full Duplex)
• Supports Half / Full Duplex mode
• Supports Auto MDI- / MDI-X
• Supports back-pressure (Half Duplex) and flow control (IEEE 802.3x)
• 4 mechanical buttons
• Metal housing
• Dimension (LxWxH): ca. 12 x 8.4 x 2.9 cm
• Colour: beige
System requirement
• A free RJ45 port
Package content
• Switch, user manual
Safety instructions:
• Protect the product against moisture
• Protect the product against direct sunlight
Hardware installation
1.
Connect the output port oft the Ethernet switch with a Ethernet port of your
network e. g. on your Router, by using a RJ45 cable (Cat5/5e/6)
2.
Connect the Ethernet devices to the input ports of the Ethernet switch.
3.
To switch from one to another input device use the appropriate button on the
front side.
Support Delock
If you have further questions, please contact our customer support
Final clause
Information and data contained in this manual are subject to change without notice
in advance. Errors and misprints excepted.
Edition: 09/2012
