-
-
7. Start up DVBT receiver
1.
Connect the USB power supply to the DVBT receiver and to the power
socket.
2.
Connect the Infrared receiver to the female port E of the receiver.
3.
Connect the antenna into female port C of the receiver.
4.
Now connect the receiver with the Scart female port to your TV.
Note: You can also connect the DVBT receiver by using the included video cable
to your TV.
8. Introduction
1.
After connection switch on the receiver by using the remote control (power
button).
2.
Choose the language, proceed as follows: Press the „menu“ button, choose „
Digital TV“ by pressing the „OK“ button -> „Configuration“ -> „OSD“ -> OSD
language“ and choose your language. Leave the Menu by pressing the „Exit“
button.
3.
Press on the remote control „AUTO SCAN“, in order to search for the
different channels.
4.
After the channels are found you can enjoy digital TV.
9. Control of remote control
9.1 Help Information
Under EPG, MENU, LIST, TELETEXT, GAME window, you can press <INFO>
key to watch help information on how to operate current function.
9.2 POWER ON/OFF
Power on
In “standby” mode, press <POWER> to switch power on.
Power off
When it is running, pressing <POWER> will enter into the “Standby" mode.
9.3 VOLUME UP/DOWN AND MUTE
Press <VOL+/-> to adjust volume when system is in normal playing mode; and it
will show volume bar on the screen;
Press <MUTE> to enter mute mode when normally playing and repress <MUTE>
to back the normal state.
9.4 TV /RADIO SWITCH
Press <TV/RADIO>, to switch between TV and Radio.
