background image

Declaration of conformity

Products with a CE symbol fulfill the RED directive (2014/53/EU) and RoHS directive 

(2011/65/EU+2015/863), which were released by the EU-comission.

The declaration of conformity can be downloaded here: http://www.delock.de/service/conformity

 

WEEE-notice

The WEEE (Waste Electrical and Electronic Equipment)-directive, which became effective as 

European law on February 13th 2003, resulted in an all out change in the disposal of disused 

electro devices. The primarily purpose of this directive is the avoidance of electrical waste (WEEE) 

and at the same time the support of recycling and other forms of recycling in order to reduce 

waste. The WEEE-logo on the device and the package indicates that the device should not be 

disposed in the normal household garbage. You are responsible for taking the disused electrical 

and electronical devices to a respective collecting point. A separated collection and reasonable 

recycling  of  your  electrical  waste  helps  handling  the  natural  resources  more  economical. 

Furthermore recycling of electrical waste is a contribution to keep the environment and thus also 

the health of men. Further information about disposal of electrical and electronical waste, recycling 

and the collection points are available in local organizations, waste management enterprises, in 

specialized trade and the producer of the device.

            

          

EU Import: Tragant Handels- und Beteiligungs GmbH

Beeskowdamm 13/15, 14167 Berlin, Germany

Содержание 12951
















Отзывы: