Environment Protection and Waste Protection and Electrical Equipment Regulations
(WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has reached the end of it’s useful life, please dispose of it
in an environmentally friendly way. Drain any fluids (if applicable) into approved containers, in accordance with local waste regulations. It is our
policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice. No liability is accepted
for incorrect use of this product.
Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284
757575 [email protected] www.dellonda.co.uk
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
•
Offer up the two table base infill panels (C) into
the table base legs (B), using the shown nut a bolt
sequence to secure, pass a steel washer (G) onto
the M6 x 35mm bolt (D) then pass this through the
two tabs trapping a plastic washer (H) in between,
then push on another M6 steel washer (G) and
secure with an M6 nut (F), cover the bolt head by
pushing the plastic bolt cap (I).
• Repeat this sequence for the other seven
connecting positions.
• It may be useful to only tighten the bolts for
all eight locations at the end of the assembly
sequence.
• Turn the table assembly onto its feet and carefully
lift into position the glass table top (J).
STORAGE
• Ensure that the table is clean dry before being
stored in a cool, dry and well ventilated location.
• Wipe down the table’s frame and legs and any
areas that could have been exposed to mud and
dirt.
• Store the table during long periods of not being
used prolong the usable life of all parts.
J
