Assembly
• Refer to diagrams 1-30.
• Ensure the barbecue is assembled properly.
•
CAUTION
It is inherent with fabricated steel parts that edges and corners can cause cuts if improperly handled during assembly.
BE
CAREFUL
and wear correct work gloves.
• Attach gas hose to regulator. Secure with worm drive clip. Attach hose/regulator assembly to burner supply pipe on side of barbecue, secure with
worm drive clip.
Preparation
•
ATTACH THE GAS BOTTLE
•
Changing of gas bottles
should be carried out away from any source of ignition. Make sure the barbecue is turned off.
•
Position your gas
cylinder at the side of your barbecue,
not underneath
, remember the cylinder must be kept away from heat, and be in a safe
position.
•
Attach the regulator to t
he gas cylinder.
•
Perform the Gas Le
ak Test as described in Safety Precautions.
•
Check that a
ll areas under the front panel are free from any obstructions (insects etc.). This area must be kept clean as this may affect the flow of
combustion or of ventilation air.
•
Check the hose
before each and every use, looking for cracks, cuts or any abrasions.
•
If the hose is fo
und to be faulty in any way,
DO NOT
attempt to use your barbecue, replace the hose with one from Dellonda.
•
Ensure the hos
e is free from any kinks or bends which will affect the gas flow, when using your barbecue. Also the hose must not have undue
tension and must not touch any part of the barbecue which may be hot. The hose must not be longer than 1.5 metres.
•
The barbecue mu
st be kept away from flammable materials.
•
DO NOT
move
the barbecue whilst in use.
fig.1
