3
Assembly
Assembling the handle
•
NOTE
: Carefully unfold the lawnmower handle, taking care not to pinch or damage the lawnmowers control cables.
•
Lift the Handle panel (part 13) with cup holder away from the unit and sit on the floor ensuring not to pinch or damage the travel speed cable.
• Identify the control lever assembly Items 1 and 2 from the parts list, refer to the diagram below to on how to rotate and position parts 1.4 and 1.6
together and secure in place with the quick coupler.
•
Offer into place the complete handle assembly (without the handle panel 13). We suggest you fit the handle onto the outside of the fixing position
bracket, line up the holes and pass the 4 bolts through the holes and loosely fix the nuts on the inside face (fully tighten all fixings at the end of
assembly).
• Once the handle is bolted to the mower lift the handle panel (13) up and place it onto the handle assembly use the screws already in the handle
arms to screw into place, ensure all the cables are free, not obstructed or wrapped around the handle.
• Use the two cable management clips to neatly arrange the control cables onto the handle assembly. Make sure they are not kinked and can all
move freely.
Assembling the Grass Catcher
•
Clip the plastic hooks at the end of the textile part of the grass catcher to the metal frame (Fig.3).
•
The catcher is fitted with a ‘Full’ indicator flap. When the flap on the catcher closes, the bag needs to be emptied.
Item Description
1
Start/ brake lever
2
Travel lever
3
Travel speed control
4
Handle (Top)
5
H
andle fixing screw with Quick Coupler
6
Handle (Bottom)
7
Fuel tank cap
8
A
ir filter cover
9
S
ide deflector
10
Cap (c/w Oil dipstick)
11
Height adjustment lever
12
G
rass cover for rear deflector
13
Handle panel
Fig.1
Fig.1-4
Fig.1-6
Fig.2
1
Fixing position
Fig.3
