• Turn the table assembly onto its feet and carefully lift into
position the glass table top (J).
• Push the parasol insert (K) through the glass top (J) and table
top (A) and screw the nut back on from the underside to secure
in place.
STORAGE
• Ensure that the table is clean dry before being stored in a cool,
dry and well ventilated location.
• Wipe down the table’s frame and legs and any areas that could
have been exposed to mud and dirt.
• Store the table during long periods of not being used prolong the
usable life of all parts.
Assembly
• Carefully turn the table top (A) onto it’s face, position the two legs
(B) and bolt in place using the M6 x 20mm bolts (E) and M6 steel
washers (G).
•
Offer up the two table base infill panels (C) into the table base
legs (B) assemble using the illustrated nut a bolt sequence to
secure. Pass a steel washer (G) onto the M6 x 35mm bolt (D) then
pass this through the two tabs trapping a plastic washer (H) in
between, then push on another M6 steel washer (G) and secure
with an M6 nut (F), cover the bolt head by pushing the plastic bolt
cap (I).
• Repeat this sequence for the other seven connecting positions.
• It may be useful to only tighten the bolts for all eight locations at
the end of the assembly sequence.
