DK 08 helmet Bluetooth headset pairing with Mobile phone
1. Place the mobile phone and the Bluetooth headset together within 1 meter.
2. Make sure the Bluetooth headset is powered off.
3. Press and hold the Vol+ button of Bluetooth helmet headset about 8secs until heard a "dudu"
tone played and the Blue and Red LED indicator flashes alternately, and then release the button
4. Initiate Bluetooth function of the mobile phone and search the Bluetooth headset according to
mobile phone user manual.
5. Choose the Bluetooth device with the name "DK08", then press ok button to pair with it, enter
pairing password
“0000”
, then the indicator turns into regular Blue light flash, after that
You will hear a "di" tone to indicate success pairing. Then you can transmit voice frequency
Through Bluetooth headset and use the button of that to control music playing of the mobile
Phone.
Note:
1. Some mobile phones don't need to input pairing password, because it can automatically
Complete the pairing process.
2. After mobile phone paired with DK08 headset, second time turn on the headset, it will auto
Connect the mobile phone in connectable state. If they are not connected and the helmet
Bluetooth headset is idle state (blue LED short flashing every 3 seconds), a short press the
"Vol-" button, the headset will initiate a connection to the headset.
FAQ:
1. Cannot power on?
It might have low battery, please try again after charging for 3 hours.
2. No sound?
Check if the speaker is installed correctly, Check the volume,
Make sure that the speaker is switched to ON.
3. Speakers have aftersound?
Maybe they are too close to the microphone, please move the speakers away from the microph
one to a normal distance.
4. Disconnect with mobile phone?
Check if the battery is running low, if not, is the distance between them further than 10m? Or is
there obstacles that absorb frequency signals such as metals or water?
5. Cannot pair with mobile phone?
Clear all the pairing information according to user manual, and then put the headset and
mobile phone together within 1m and try to pair after entering password "0000".
6. Fail to connect with mobile phone?
Please make sure the mobile phone support Bluetooth function and Bluetooth HFP, A2DP and
AVRCP or other related protocols.
7. Fail to reconnect or automatically reconnect with mobile phone?
Remove all the matching information according to Bluetooth headset manual as well as that of
your phone. Then turn off your mobile phone, take out the battery for several seconds, restart
mobile phone and pair with Bluetooth headset and set the headset read as
“default/trust/test/permit
automatically connection/always visible/allow to be
found”
device,
and further ensure that the phone prompt tone is not vibrating mode (because the vibrating
