5
SAFETY FEATURE
WARNING: IT IS NORMAL FOR THE POWER CORD TO FEEL WARM TO THE TOUCH; HOWEVER, A
LOOSE FIT BETWEEN THE OUTLET AND THE PLUG MAY CAUSE OVERHEATING OF THE PLUG. IF THIS
OCCURS, TRY INSERTING THE PLUG INTO A DIFFERENT OUTLET. CONTACT A QUALIFIED ELECTRI-
CIAN TO INSPECT THE ORIGINAL OUTLET FOR DAMAGE.
IN THE BOX
• INFRARED ZONE HEATING SYSTEM
• REMOTE CONTROL(2 AAA BATTERIES NOT INCLUDED)
• INSTRUCTION BOOKLET
PRODUCT DIAGRAM
WARNING: This heater has a voltage rating of 120
volts. The cord has a plug as shown in A. An adapter
as shown in C is available for connecting three-blade
grounding- type plugs to two-slot receptacles. The
grounding lug extending from the adapter must be
connected to a permanent ground such as a properly
grounded outlet box. The adapter should not be used
if a three-slot grounded receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE
GROUNDED PLUG.
4
WARNING:
This heater has a voltage
rating of 120 volts. The cord has a plug as
shown in A. An adapter as shown in C is
available for connecting three-blade grounding-
type plugs to two-slot receptacles. The
grounding lug extending from the adapter must
be connected to a permanent ground such as a
properly grounded outlet box. The adapter
should not be used if a three-slot grounded
receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE
OF THE GROUNDED PLUG.
WARNING:
It is normal for the power cord to feel warm to the touch; however, a loose fit
between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting
the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for
damage.
IN THE BOX
INFRARED ZONE HEATING SYSTEM
REMOTE CONTROL(2 AAA batteries not Included)
INSTRUCTION BOOKLET
PRODUCT DIAGRAM
Air Outlet
Front Panel
Control Panel
Wheels
Remote Control
Air Intake
Cord Clamp
Power Switch
Temp Sensor