9
OPERATING INSTRUCTIONS
7
Power for heat-up mode is 1500W; heat-down is 750W,and
turn off the heat.
2
Setting Desired Temperature
Or
Adjust the desired temperature by pressing the Up/Down
arrows on the con trol panel or remote control.
Desired temperature options vary from 59
to 95
. Once
you have chosen the desired temperature, the heater will
remain on until the room temperature increases to the
temperature on the digital display. The heater will cycle on
and off to maintain the desired room temperature.
3
Setting flame
Or
Adjust the brightness of the flame and turn off.
4
Setting the POWER OFF TIMER Function
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a
certain set time, and can only be set while the heater’s display is in the “On” position.
Or
Turn the heater to the “On” position .Press the Timer
button on the heater’s control panel or the remote.
The digital display changes from the “temperature” to the
“hours” option for the timer. Continue to press the timer
button to change the number of hours you would like the
heater to run before powering itself off .The hour options
for the timer are from 0 to 12 hrs. (in 1 hr increments).
The selected hour increments will flash for a few seconds,
then revert back to the set desired temperature .The Timer
indicator light will remain lit as long as the Timer is set.
The heater will power OFF when the internal heater clock
counts down the hour increments you set.
Power for heat-up mode is 1500W; heat-down is 750W,and
turn off the heat.
Adjust the desired temperature by pressing the Up/Down
arrows on the con trol panel or remote control.
Adjust the brightness of the flame and turn off.
Desired temperature options vary from 59°F to 95°F. Once you
have chosen the desired temperature, the heater will
remain on until the room temperature increases to the tem-
perature on the digital display. The heater will cycle on and off
to maintain the desired room temperature.
02. SETTING DESIRED TEMPERATURE
03. SETTING FLAME
04. SETTING THE POWER OFF TIMER FUNCTION
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain
set time, and can only be set while the heater’s display is in the “On” position.
Turn the heater to the “On” position .Press the Timer button
on the heater’s control panel or the remote.
The digital display changes from the “temperature” to the
“hours” option for the timer. Continue to press the timer
button to change the number of hours you would like the
heater to run before powering itself off .The hour options for
the timer are from 0 to 12 hrs. (in 1 hr increments).
The selected hour increments will flash for a few seconds,
then revert back to the set desired temperature .The Timer
indicator light will remain lit as long as the Timer is set. The
heater will power OFF when the internal heater clock counts
down the hour increments you set.
