22
INSTALLATION INSTRUCTION (INDOOR UNIT)
CONDENSED WATER DRAINAGE
1. Place the drain hose below the piping.
2. The drain hose must slant downwards to the outdoor
side.
3. Do not bend the drain hose or leave it protruding or
twisted. Do not put the end of the hose into water.
4. If the piping is installed to the right, the pipe, power
cable, and drain hose must be tied and secured onto
the rear of the unit with a pipe connection.
FINISHING THE INDOOR UNIT INSTALLATION
1. Arrange the pipes, cables, drain-hose according to the
image. Cover the pipe joints with insulating material
and secure it with vinyl tape.
2. Run the bounded pipe through the hole on the wall
and mount the indoor unit onto the upper part of the
mounting plate securely.
3. Press and push the lower part of the indoor unit tightly
against the mounting plate.
Ensure the smooth flow of the condensed water
drainage to prevent leakage or overflow.
