Dell XPS 630i, Руководство по обслуживанию, Страница: 34 / 120

34
Cards
7
Install a filler bracket in the empty card-slot opening. If you are replacing
the card, see "Installing PCI and PCI Express Cards" on page 35.
NOTICE:
Installing filler brackets over empty card-slot openings is necessary to
maintain FCC certification of the computer. The brackets also keep dust and dirt out
of your computer.
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the
cards can prevent the computer cover from closing properly or cause damage to
the equipment.
8
Replace the screw that secures the filler bracket to the chassis.
NOTE:
If you removed the alignment guide, replace the alignment guide on the
card fan cage; push the alignment guide until it clicks into place.
9
Push the card retainer back into its original position; push its tip so that its
tab clicks into place.
10
Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
NOTICE:
To connect a network cable, first plug the cable into the network port or
device and then plug the cable into the computer.
1 PCI Express x16 card 2 securing tab
3 PCI Express x16 card slot
1
3
2
book.book Page 34 Monday, January 7, 2008 2:53 PM