Steps
1. Align the notch on the solid-state drive with the tab on the SSD2 slot.
2. Slide the solid-state drive into the SSD2 slot.
3. Using the alignment post, place the solid-state drive thermal bracket over the solid-state drive.
4. Align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board.
5. Replace the single (M2x4) screw that secures the solid-state drive thermal bracket and the solid-state drive to the system
board.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Fan
Removing the left fan
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
The following image indicates the location of the left fan and provides a visual representation of the removal procedure.
Removing and installing components
23
