Dell XPS 17 9720 Скачать руководство пользователя страница 53

Страница: 53 / 71

Table 6. System setup options—Integrated Devices menu (continued)

Integrated Devices

By default, Enable Fingerprint Reader Device is selected.

Enable Fingerprint Reader Single Sign On

Enables or disables the Fingerprint Reader Single Sign On capability.

By default, Enable Fingerprint Reader Single Sign On is selected.

Table 7. System setup options—Storage menu

Storage

SATA Operation

Configures operating mode of the integrated SATA hard drive controller.

Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology).

Storage Interface

Port Enablement

Enables the selected onboard drives.

●

SATA-4

Default: ON

●

M.2 PCIe SSD-0

Default: ON

●

M.2 PCIe SSD-1

Default: ON

Drive Information

Displays the information of various onboard drives.

Enable SMART Reporting

Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).

Default: OFF

Enable MediaCard

Enables to switch all media cards On/Off or set the media card to read-only
state.

By default, Enable Secure Digital (SD) Card is selected.

Table 8. System setup options—Display menu

Display

Display Brightness

Brightness on battery power

Sets the screen brightness when the computer is running on battery power.

Default: 50

Brightness on AC power

Sets the screen brightness when the computer is running on AC power.

Default: 0

Touch Screen

Enables or disables the touch screen for the OS.

NOTE:

The touch screen will always work in the BIOS setup irrespective of

this setting.

Full Screen Logo

Enabled or disabled the computer to display full screen logo if the image match
screen resolution.

Default: OFF

Direct Graphics Controller Direct
Output Mode

When enabled, all graphics output ports directly to the Graphics Processing
Unit (GPU), bypassing Intel Integrated graphics outputs for HDMI, Thunderbolt,
and mDP ports.

Default: OFF

BIOS setup

Содержание XPS 17 9720








































































Результаты поиска

Содержание XPS 17 9720

Отзывы:

Похожие инструкции для XPS 17 9720

Бренды по названию

Популярные бренды

Dell XPS 17 9720, Руководство по обслуживанию

Результаты поиска

Содержание XPS 17 9720

Отзывы:

Похожие инструкции для XPS 17 9720

Бренды по названию

Популярные бренды