Dell XPS 13, Руководство по обслуживанию

Страница: 70 / 117

Extracción de la placa base
AVISO: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working
inside your computer . After working inside your computer, follow the
instructions in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
NOTA: Your computer’s Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTA: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTA: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
Requisitos previos
1 Extraiga la cubierta de la base .
2 Extraiga la batería.
3 Extraiga la tarjeta inalámbrica .
4 Extraiga la unidad de estado sólido .
5 Extraiga el disipador de calor .
Procedure
1 Peel off the tape that secures the antenna cables and power-adapter port cable
to the system board.
2 Disconnect the camera cable, touchscreen cable (optional), power-adapter port
cable, and coin-cell battery cable from the system board.
70