Security
The Security tab displays the security status and allows you to manage the security features of the computer.
Boot
The Boot tab allows you to change the boot sequence.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
Back to Contents Page
EIST
Allows the clock speed of the processor to be
dynamically changed by software while minimizing
power draw and heat dissipation.
Default: Enabled
Execute Disable Bit
Allows increased protection against buffer overflow
attacks.
Default: Enabled
Intel
®
Virtualization
Technology
Allows a platform to run multiple operating systems
and applications in independent partitions, allowing
one computer to function as multiple virtual
computers.
Default: Disabled
Power Management
USB Wake Support
Allows USB devices to wake-up the computer from
standby. This feature is enabled only when the
AC adapter is connected.
Default: Enabled
Wake On LAN
Allows the computer to be remotely turned on. This
feature is enabled only when the AC adapter is
connected.
Default: Enabled
Post Behavior
Adapter Warnings
Enables or disables adapter warnings.
Default: Enabled
Fast Boot
Allows the System Setup to skip certain tests
during power on self test (POST) which decreases
the amount of time needed to boot the computer.
Default: Enabled
Keyboard Click
Enable or disable the keyboard sound.
Default: Disabled
Wireless
Internal Bluetooth
Enable or disable the Bluetooth module.
Default: Enabled
Internal WLAN
Enable or disable the wireless LAN module.
Default: Enabled
Internal WWAN
Enable or disable the wireless WAN module.
Default: Enabled
Security
Service Tag
Displays the current service tag of the computer.
Asset Tag
Displays the asset tag.
Unlock Setup Status
Specifies whether a setup password has been
assigned.
Admin Password Status
Specifies whether an admin password has been
assigned.
Admin Password
Allows you to set an admin password.
System Password Status
Specifies whether a system password has been
assigned.
System Password
Allows you to set a system password.
Password on Boot
Enable or disable authentication every time your
computer boots.
Password Bypass
Allows you to bypass the system and hard drive
passwords when your computer restarts.
However, you must enter the passwords if you are
turning the computer on from the shutdown state.
Password Change
Enable or disable the password change feature.
Computrace
Enable or disable the Computrace feature on your
computer.
HDD Password Configuration
Allows you to set a password on the computer's
internal hard drive (HDD). The hard drive password is
enabled even when the hard drive is installed on
another computer.
Содержание Vostro 3700
Страница 34: ...Replacing the IO Board To replace the IO board perform the above steps in reverse order Back to Contents Page ...
Страница 37: ...Replacing the Keyboard To replace the keyboard perform the above steps in reverse order Back to Contents Page ...
Страница 66: ...10 Remove the screws that secure the speakers to the palm rest 11 Release the speakers from the palm rest ...
Страница 71: ......