Dell Vostro 3671 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 84

Dell Vostro 3671 Скачать руководство пользователя страница 9

480Mbps theoretical maximum throughput, making data transfer at around 320Mbps (40MB/s) — the actual real-world maximum.
Similarly, USB 3.0/USB 3.1 Gen 1 connections will never achieve 4.8Gbps. We will likely see a real-world maximum rate of 400MB/s with
overheads. At this speed, USB 3.0/USB 3.1 Gen 1 is a 10x improvement over USB 2.0.

Applications

USB 3.0/USB 3.1 Gen 1 opens up the laneways and provides more headroom for devices to deliver a better overall experience. Where USB
video was barely tolerable previously (both from a maximum resolution, latency, and video compression perspective), it's easy to imagine
that with 5-10 times the bandwidth available, USB video solutions should work that much better. Single-link DVI requires almost 2Gbps
throughput. Where 480Mbps was limiting, 5Gbps is more than promising. With its promised 4.8Gbps speed, the standard will find its way
into some products that previously weren't USB territory, like external RAID storage systems.

Listed below are some of the available SuperSpeed USB 3.0/USB 3.1 Gen 1 products:

•

External Desktop USB 3.0/USB 3.1 Gen 1 Hard Drives

•

Portable USB 3.0/USB 3.1 Gen 1 Hard Drives

•

USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters

•

USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers

•

USB 3.0/USB 3.1 Gen 1 Solid-state Drives

•

USB 3.0/USB 3.1 Gen 1 RAIDs

•

Optical Media Drives

•

Multimedia Devices

•

Networking

•

USB 3.0/USB 3.1 Gen 1 Adapter Cards & Hubs

Compatibility

The good news is that USB 3.0/USB 3.1 Gen 1 has been carefully planned from the start to peacefully co-exist with USB 2.0. First of all,
while USB 3.0/USB 3.1 Gen 1 specifies new physical connections and thus new cables to take advantage of the higher speed capability of
the new protocol, the connector itself remains the same rectangular shape with the four USB 2.0 contacts in the exact same location as
before. Five new connections to carry receive and transmitted data independently are present on USB 3.0/USB 3.1 Gen 1 cables and only
come into contact when connected to a proper SuperSpeed USB connection.

Technology and components

9

«
...
7
8
9
10
11
...
»

Содержание Vostro 3671





















































































Отзывы:

Нет отзывов