manualshive.com logo in svg

Dell VOSTRO 3653, Руководство пользователя

Поделиться
Скачать
Dell VOSTRO 3653 Скачать руководство пользователя страница 11

4.

Perform the following steps to remove the hard drive from the hard-drive bracket:
a. Remove the screws that secure the hard-drive bracket to the hard drive.
b. Remove the hard drive from the hard-drive bracket.

Installing the Hard-Drive Assembly

1.

Replace the hard drive into the hard-drive bracket.

2.

Install the screws that secure the hard-drive bracket.

3.

Install the hard-drive assembly into its slot on the computer.

4.

Close the front-bezel door.

5.

Install the screw that secures the hard-drive assembly to the front-bezel door.

6.

Connect the SATA cable and the power cable to the hard-drive assembly.

7.

Install the:
•

bezel

•

cover

8.

Follow the procedures in 

After Working Inside Your Computer

.

Removing the Optical-Drive Assembly

1.

Follow the procedures in 

Before Working Inside Your Computer

.

2.

Remove the:
•

cover

•

bezel

3.

Perform the following steps to remove the optical-drive assembly from the computer:
a. Open the 

front-bezel door

.

b. Disconnect the data cable and power cable from the connectors on the optical-drive assembly 

[1, 2].

c. Close the front-bezel door [3].
d. Remove the screw that secures the optical-drive assembly to the computer [4].
e. Slide the optical-drive assembly to remove it from the computer [5].

11

Содержание VOSTRO 3653






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды