Installing the Expansion Card
1.
Insert the expansion card to its connector on the system board.
2.
Secure the expansion card by pushing the card-retention latch until it snaps into place.
3.
Push the metal tab until it snaps in place to secure the expansion card.
4.
Close the front-bezel door.
5.
Install the:
a.
bezel
b.
cover
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power Supply Unit (PSU)
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
•
cover
•
bezel
3.
Open the
front-bezel door
.
4.
Perform the following steps to remove the PSU from the computer:
a. Disconnect the PSU cables from the connectors on the system board [1, 2].
b. Unroute the PSU cables from the holder.
c. Remove the screws that secure the PSU to the computer [3].
d. Slide and lift the PSU to remove it from the computer [4].
15
