Next steps
1. Replace the
2. Replace the
3. Replace the
4. Follow the procedure in
after working inside your computer
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Disconnect the battery cable from the connector on the system board
5. Remove the
6. Remove the
Steps
1. Peel off the tape securing the wireless antenna from the system board [1].
2. Unroute the display cable from the routing guides on the palmrest and keyboard assembly [2].
3. Unroute the display cable from the routing guides on the palmrest and keyboard assembly [3, 4].
48
Removing and installing components