manualshive.com logo in svg

Dell U3423WE, Руководство пользователя

Поделиться
Скачать
Dell U3423WE Скачать руководство пользователя страница 37

Setting up the monitor 

│

  37

Organizing your cables

After attaching all necessary cables to your monitor and computer, (See 

Connecting your monitor

 for cable attachment,) organize all cables as shown 

above.

Connecting your monitor

WARNING: Before you begin any of the procedures in this section, 
follow the 

Safety instructions

.

NOTE: Dell monitors are designed to work optimally with the Dell-
supplied cables inside the box. Dell does not guarantee the video quality 
and performance if non-Dell cables are used.

NOTE: Route the cables through the cable-management slot before 
connecting them.

NOTE: Do not connect all cables to the computer at the same time.

NOTE: The images are for the purpose of illustration only. The 
appearance of the computer may vary.

To connect your monitor to the computer:

1.

Turn Off your computer and disconnect the power cable.

2.

Connect the DisplayPort, HDMI, or USB Type-C cable from your monitor to 
the computer.

Содержание U3423WE































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды