Dell Studio XPS 1340 страница 21 Скачать руководство пользователя

Страница: 21 / 39

Back to Contents Page

Rear Caps

Dell™ Studio XPS™ 1340 Service Manual

Removing the Rear Caps

Replacing the Rear Caps

Removing the Rear Caps

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Remove the three screws that secure the left and right rear caps to the computer base.

Lift the rear caps off the computer base.

Replacing the Rear Caps

Replace the rear caps.

Replace the three screws that secure the left and right rear caps to the computer base.

Replace the base cover (see

Replacing the Base Cover

Slide the battery into the battery bay until it clicks into place.

Back to Contents Page

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Before performing this procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer,

disconnect the modem from the wall connector and the computer, and remove any other external cables from the computer.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is

not covered by your warranty.

NOTICE:

To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 10)

before working inside the computer.

rear caps

screws (3)

Содержание Studio XPS 1340








































Результаты поиска

Содержание Studio XPS 1340

Отзывы:

Похожие инструкции для Studio XPS 1340

Бренды по названию

Популярные бренды

Dell Studio XPS 1340, Руководство по обслуживанию

Результаты поиска

Содержание Studio XPS 1340

Отзывы:

Похожие инструкции для Studio XPS 1340

Бренды по названию

Популярные бренды